Stationary 12-volt Powered Water Purification System

For making Fresh Drinking Water in Remote Locations using water from Rivers and Lakes.

 

Aqua Sun engineered and designed the Villager® – A1 System in 1994 and started manufacturing the system in 1995. This system is a wall mount system and is completely automatic that can take its water from a river, lake, well, or holding tank systems and produce approx 1 gallon / 3.7 liters per minute x 60 minutes = 60 gallons / 220 liters per hour x 5 hours = 300 gallons / 1,100 liters in a 5 hour period. This system requires a auxiliary power source such as a vehicles battery, 12 volt generator or existing solar power system.   This system comes as a turn-key package. It is designed for easy installation as all of the wiring is pre wired and plumbing is pre-plumbed and all that needs to be done is hang the water treatment system on the wall in a convenient location. Plumbing in and out of the water treatment system is easy with 10 foot inlet female hose and 10 foot outlet male hose pre-plumbed into system. The Battery / Power Source  Wire is prewired and will need to have the Positive (+) and Negative (-) wires connected to the Power Source. Install Filters and UV Lamp and the system is ready for operation. It is simple and easy to install the Villager A1 Auxiliary Powered Water Purification System.

 

 

Stationary 12-volt Powered Water Purification System

For Emergency Relief Operations

 

This system is designed to be mounted into emergency vehicles such as a water tender or fire truck. It is wired directly into vehicles battery and the intake hose is for insertion into the apparatus water tank. All units additionally feature a sprayer to facilitate showering, misting (for lowering body temperature), and decontamination. The Villager A1 can be used for short term emergency use when water supply sources have become contaminated, a water tender or fire truck can be brought in and supply clean and safe drinking water to the local civilians until water surfaces can be brought back on line.  only If the local Public Health Department requires it, chlorine can be added to the cleaning process to add a residual disinfectant through the innovative Chlorinator Injector System.

 

This Villager A1, 12-volt Powered Water Purification Systems pulls the water from the source and through a  Sediment Filter to remove the sediment. The water is then pushed through a Carbon Block Polishing Filter that has the capabilities of removing Giardia and Cryptosporidium Cysts, Entamoeba and Toxoplasma Cysts, Schistosomiasis, Herbicides, Pesticides, Trihalomethanes (THMs), certain Volatile Organic Chemicals (VOCs), Chlorine and Chlorine By-Products, Sediment, Bad Taste, Odors, Color, Smell, and many other Harmful Chemicals and Contaminants down to a 0.5 micron. The polished filtered water is then channeled past an Ultraviolet Light Disinfecting Process that has the ability to kill Bacteria, Viruses, Typhoid Fever, Coliform, Dysentery, Cholera, Infectious Jaundice, Hepatitis and Influenza Virus, E-coli, Enteric Fever and many other unwanted microorganisms to a 99.999% purity.

 

 

We can ship our systems to almost anywhere in the world

 

Shipping sizes and weights for this system.

Villager A1 System; Box Size,  22 x 20 x 12 @ 20 lbs

With Replacement Parts Kit;    24 x 20 x 18 @ 30 Lbs

We ship individually, pallets or ocean containers.

This System is approved for air shipments inside and outside the continental United States.

All water contact components carry a NSF Approval Rating and the ultraviolet light carries a Certificate of Analysis.

 

This system comes in 2 different models: With and without water pressure.

Villager S1:    This system is for areas WITHOUT water pressure and no electrical power.

Villager A1:  Same system as above but for locations WITH 12 volt electrical power.

We can design for your needs.

The filter and UV light manufacturers are members of the Water Quality Association.

 

Aqua Sun International is a registered DEPARTMENT OF DEFENSE CENTRAL CONTRACTOR, an approved UNITED NATIONS SUPPLIER, and a member of the AMERICAN SOLAR ENERGY SOCIETY (ASES)

Aqua Sun International located in Minden, Nevada U.S.A. engineered and designed the Villager line of solar water purification systems starting back in 1993 and is the original / only manufacturer of this system.

 

 

Filtration Components:

 

SEDIMENT FILTER

Removes ground water sediment and protects the carbon block filter from premature clogging. Not washable.

APPROXIMATE FILTER LIFE EXPECTANCY depends on how dirty incoming water is or 1 year maximum.

 

  0.5 micron CARBON BLOCK

 

Removes and reduces giardia lamblia and cryptosporidium cysts, volatile organic chemicals "VOC's" pesticides and herbicides, benzene, sediment, color, bad taste and odors such as hydrogen sulfide "rotten egg smell" and many other microorganisms down to a 0.5 micron. This Carbon Block Filter polishes the water crystal clear for refreshing good tasting water.

APPROXIMATE FILTER LIFE EXPECTANCY 10,000 gallons / 37,000 liters or one year of clear incoming water.

 

  ULTRAVIOLET DISINFECTING LAMP

 

Clean, safe and natural UV light rays have the ability to kill the bacteria and virus to 99.999 % purity without any harmful side effects much like chemical agents normally added to drinking water. The ultraviolet range is ideal for killing Micro-organisms such as E-coli, Coli form, Cholera, Legionnaires Disease, Hepatitis Virus, Typhoid Fever, Dysentery, Infectious Jaundice, Influenza, Enteric Fever and many other unwanted Microorganisms.

APPROXIMATE UV BULB LIFE EXPECTANCY 9000 hours, or approx 2 Years.

 

Specifications

 

Turn-Key System, Built-in Flexibility

Easy, 1-minute Set-Up, Instant Water Production

1 gallon (3.7 liters) per minute

60 gallons (220 liters) per hour approx.

12-volt Auxiliary Powered Operation

12-volt Operation = 10+ Hrs / Day

1 gallon (3.7 liters) per minute = 60 gals per hour x 10+ hours = 600 gallons / 2,220 liters

UV and Filtration water purification process

Stationary Weight: Approx. 30 lbs.

Size:   16” wide x 18" long x 6" deep

15 ft long auxiliary power extension cord

Rugged / Reliable: Easy to Operate

Pull water from most rivers and lakes

 

 

Standard Features:

 

System Dimensions:  16” wide x 18" long x 6" deep @ 30 Lbs.

 

Output Watts:

 Ultraviolet Light only; 10 Watts / 0.84 amps per hour

    Self Priming Water Pump; 1.8 amps max per hour depending on head

Weight Empty:   approx. 30 lbs.

Inlet Connection: ¾ “Female Standard Hose Threaded Port / Swivel. 10 feet long

Outlet Connections: ¾ “Male Standard Hose Threaded Ports. 7 feet long

Rated Water Pressure:   20 PSI minimum / 65 PSI maximum

Ultraviolet Lamp Output: 16,000 microwatt seconds per centimeter squared and carries a Certificate of Analysis

Hoses, electrical cords and all misc. fittings included with system

NSF and FDA APPROVED on filtration and water contact components

Filter and UV Replacement Parts Filter Kits at a discounted available

During Emergency Responses, the Villager provides fast, flexible access to emergency water

The Villager A1 supports Emergency Vehicles being pre-positioned and then brought out quickly for hurricanes, tornadoes, ice storms, earthquakes, etc

The Villager A1 provides fresh water for personal showering, hydration, decontamination, fire personnel re-hab, medical needs, evacuation and transport support

Easily Adaptable to ice machines, kitchen facilities and food preparation, laundry support, dish washing machines, etc and supports shelters housing several hundred people

 

Options (extra fees apply):

 

U.S. Voltage to 12 volt; 120 volt to 12 volt electrical power converter.

 

International Voltage to 12 volt;   220 volt 50 Hz. Uses a 220 volt 50 Hz to a 120 volt Power Step Down Transformer then the above 120 volt to 12 volt converter.

 

Lamp Out Circuit;  Different UV System with Solenoid Valve,  will not operate all water flow if UV light is not ON.

 

For pricing, more information, or to place an order,

call us at (775) 783-8566 or email us at